Black Copper Pos P80 Driver Setup V7.17

Go to Printer Properties > Ports tab. Switch the checkmark to a different active USB port (e.g., move from USB001 to USB002 ) until the document prints. Issue 3: Receipts Cut Off at the Margins

: Choose the correct interface for your connection:

For USB setup, click to automatically detect the active virtual port (e.g., USB001, USB002). Click Finish to complete the software wizard. Verifying the Setup

Ensure the default paper size is locked to 80mm x 297mm or 80mm x Roll to prevent text from clipping or formatting incorrectly within your software. 6. Troubleshooting Common Installation Errors black copper pos p80 driver setup v7.17

Choose or XP-80 from the printer series drop-down menu. The Black Copper P80 utilizes the standard 80mm thermal receipt command set (ESC/POS protocol). Port Configuration

Connect the printer to your PC via USB, Serial, or Ethernet.

Note: Avoid third-party driver websites to ensure your system remains secure. Step 2: Running the Installer Go to Printer Properties > Ports tab

The installer will usually auto-detect your Windows version. Verify that the correct operating system (e.g., Windows 10 or Windows 11) is highlighted.

: In the Device Settings tab, configure the cash drawer to open "Before Printing" or "After Printing".

Always use the specific v7.17 driver archive to guarantee compatibility with modern Windows environments (Windows 10 and Windows 11). Click Finish to complete the software wizard

Locate the executable file (usually packaged as a .zip or a direct .exe installer).

After setting up the port, verify functionality and configure cash drawer integration if applicable. Printing a Test Page

Setting up the Black Copper POS P80 thermal receipt printer using Driver Setup V7.17

✅ : Device appears as “WinUSB Device” or “libusb-win32 device”