Mini Link Cli Commands: Ericsson

Always start with configure terminal .

SSH (Secure Shell) is preferred for security, though Telnet may be available on older legacy configurations. Serial Settings: Baud Rate: 9600 or 115200 (depending on NPU generation) Data bits: 8 Parity: None Stop bits: 1 Flow Control: None Navigation and System Basics

In a MINI-LINK network, you often need to configure Ethernet services end-to-end. Commands such as add_vlan are used for creating VLANs, configure for other interface settings, and setup NAT for configuring Network Address Translation when needed. ericsson mini link cli commands

show ip interface : Displays all IP addresses assigned to the management interfaces and loopbacks.

: A "hidden" command used to enable advanced configuration and debug features. : Saves the current configuration to the startup-config. 2. Monitoring & Status Commands Always start with configure terminal

For years, the CLI has been the tool of choice for professional network management. The MINI-LINK CLI is no exception; it offers a set of commands for on-site installation, configuration management, fault management, performance management, and software upgrades. For advanced IP router configuration and troubleshooting, it provides a style familiar to Cisco professionals, adding a layer of comfort for many engineers.

GET ODU

The of your MINI-LINK hardware (e.g., TN, PT 6020, 6600). The software release version you are currently running.

show ip interface : Lists all configured IP addresses, subnet masks, and administrative states across management and traffic ports. Commands such as add_vlan are used for creating

: (Specific to newer platforms) Confirms if the fast path is running for traffic interfaces. 3. Interface & Radio Configuration controller e1 : Selects a specific E1 controller for configuration. rsyslog enable : Enables system logging for tracking changes. rsyslog server [IP] 514 : Directs logs to a remote Syslog server. ping [Destination IP] : Tests reachability to another network element. 4. Troubleshooting & Testing loopback local/line