Kt 70 Installation Manual Jun 2026

| Terminal | Input Type | Wiring | |----------|------------|--------| | 5 & 6 | Thermocouple (K,J,T,E) | 5 = Positive (+), 6 = Negative (–) | | 5,6,7 | RTD (Pt100) – 3-wire | 5 & 6 = matched leads, 7 = common |

Must be between 125 Watts minimum and 500 Watts maximum at the antenna. Kt 70 Installation Manual

Always double-check your voltage and polarity before powering up. When in doubt, consult a professional e-bike technician. | Terminal | Input Type | Wiring |

The Kt 70 is generally low-maintenance, but follow these tips: The Kt 70 is generally low-maintenance, but follow

: Mutual Suppression Pulse (links to DME or other transponders to prevent simultaneous transmission). Wire Specifications

Need further help? Leave a comment or contact your local automation distributor for firmware updates and advanced PID tuning parameters.

Verify that the unit powers up, the display illuminates, and the "SBY" (Standby) mode is shown.