Leica Tc 407 Driver Site

[ Unplug Cable ] ➡️ [ Install Driver Package ] ➡️ [ Plug in Cable ] ➡️ [ Configure COM Port ]

If you have access to the portal, log in and navigate to your registered products. Leica provides a unified "Leica USB Cable Driver" installer package. This package automatically installs the certified drivers for the GEV189, GEV219, and GEV267 cables, supporting Windows 10 and Windows 11. Option B: Prolific PL2303 Drivers

Wrong cable type or flow control mismatch. Fix:

: Run the setup file for your specific Leica cable before plugging it into the PC. Hardware Connection LEICA TC 407 driver

Plug the USB end of your cable into the computer. Connect the LEMO 5-pin connector to the powered-off Leica TC407. Turn the instrument on. Verify Device Manager:

Right-click the downloaded executable installer file (e.g., Leica_USB_64bit_Driver.exe ). Select .

The Leica TPS400 series, which includes the TC407, utilizes a proprietary 5-pin Lemo connector for data input and output. To connect this instrument to a modern PC, you generally use one of two cable configurations: [ Unplug Cable ] ➡️ [ Install Driver

Here is a summary of the work process with the Leica TC407:

If you cannot get the driver to work, consider these workarounds:

A standard on the other end. The USB-to-Serial Challenge Option B: Prolific PL2303 Drivers Wrong cable type

Depending on your cable setup, you will need to identify and install one of the following driver packages: The Leica GEV189 USB Cable Driver

The Leica TC 407 does not feature native USB or wireless connectivity. Instead, it transfers data using a serial connection. The Leica GEV102 Cable

The most reliable source is the Leica Geosystems myWorld portal , where you can register your instrument to access specific firmware and cable drivers.